CEMWOOD CW1000: The fine one.
Cavity fill and levelling fill: Fill height 10 – 60 mm
The fine mineralisation of the smaller chips makes low installation heights the prime area of use for CW1000. But as a cavity fill, it is also adept at filling shafts, ducts and wooden beam ceilings. Like all product lines, CW1000 can be installed quickly without using any water or binder.
Thermally insulating and impact-sound-absorbing
Resistant to mould, fungi, rodents
No swelling or shrinkage
Low installation heights possible
Low weight
Quick processing without water
Can be walked on immediately after application
No binders
No compaction
No waste material
Chip size: 1-5mm
Fire behaviour: Class Bfl-S1
Thermal conductivity: 0.007W/mK
Bulk density approx.: 320kg/m³
Uniform load distribution: 3.2kg per cm
Installation height: 10-60mm
Packaging unit: 50 litres
Material requirement per cm of fill height: 10litres per m²
Applications
Levelling fill 10-60 mm under
Wet screed systems
Dry screed systems
OSB boards and fibreboards
Cavity fill, e.g. in wooden beam ceilings and installation ducts