Product Details
Steico multi membra 5 is a vapour control layer for creating an airtight seal internally.
Particularly robust and flexible
Highly tear-resistant
Permeable, sd value 5 m
Suitable for air-injected insulation and insulation batts
Suitable for sub and top installation when sufficient insulation covering is provided by STEICO wood fibre sarking boards
Width: 1.5m
Length: 50m
Roll Coverage: 75m²
Roll Weight: 130gm²
sd value: 5
Temperature resistance: -40 to +80 °C
UV protection in non-installed state: 3 Months
Max. tensile force longitudinal: 350
Max. tensile force transverse: 350
Elongation at Max. tensile force longitudinal: 20 %
Elongation at Max. tensile force transverse: 20 %
Tear resistance longitudinal: 270 N
Tear resistance transverse: 270 N
Fire Rating: Class E according to EN 13501-1
Application:
1. Lay the membrane or sheet so that the printed side is facing the fitter
2. Lay the sheet parallel or at a right angle to the rafters wirh an overlap of at least 10 cm
3. Ensure flush-processed bay insulation. There may be no cavities between the bay insulation and sheet/membrane. Visual check thanks to translucent character
4. Fit the membrane or sheet in a tension-free manner and avoid creases
5. Overlaps, component joints and penetrations must be made in an airtight manner by means of STEICO system accessories
6. Additional mechanical fastening (e.g. battens) must be used immediately after installation to support the weight of the insulation
[[start desc]]
Steico multi membra 5 is a vapour control layer for creating an airtight seal internally.
[[end desc]]
[[start key]]
Particularly robust and flexible
Highly tear-resistant
Permeable, sd value 5 m
Suitable for air-injected insulation and insulation batts
Suitable for sub and top installation when sufficient insulation covering is provided by STEICO wood fibre sarking boards
[[end key]]
[[start spec]]
Width: 1.5m
Length: 50m
Roll Coverage: 75m²
Roll Weight: 130gm²
sd value: 5
Temperature resistance: -40 to +80 °C
UV protection in non-installed state: 3 Months
Max. tensile force longitudinal: 350
Max. tensile force transverse: 350
Elongation at Max. tensile force longitudinal: 20 %
Elongation at Max. tensile force transverse: 20 %
Tear resistance longitudinal: 270 N
Tear resistance transverse: 270 N
Fire Rating: Class E according to EN 13501-1
[[end spec]]
[[start app]]
Application:
1. Lay the membrane or sheet so that the printed side is facing the fitter
2. Lay the sheet parallel or at a right angle to the rafters wirh an overlap of at least 10 cm
3. Ensure flush-processed bay insulation. There may be no cavities between the bay insulation and sheet/membrane. Visual check thanks to translucent character
4. Fit the membrane or sheet in a tension-free manner and avoid creases
5. Overlaps, component joints and penetrations must be made in an airtight manner by means of STEICO system accessories
6. Additional mechanical fastening (e.g. battens) must be used immediately after installation to support the weight of the insulation
[[end app]]
STEICOmulti Membra 5 Vapour Control Layer - 50m x 1.5m
- Regular price
- €162,95 EUR ex. GB VAT
- Unit Price
- €2,17 per m²
- Unit Price
- €1,81 per m²
- Sale price
- €162,95 EUR ex. GB VAT
- Unit Price
- €2,17 per m²
- Regular price
-
Product Code: SKU: STE/MM5-5015