Procheck 125 is a lightweight reinforced polyethylene vapour barrier which can be utilised in a variety of commercial applications. Procheck 125 can be installed where very high moisture vapour resistance is not a necessity but a strong, durable airtight membrane is. Procheck 125 can also be used as a separating layer above Provoid 25 Gas Venting Layer to prevent grout from the concrete pour entering into the void. This will only be used when the Protech Gas Membrane is going to be placed above the slab. It is designed to be loose laid on the Provoid 25 Gas Venting Layer with a 300mm lap.
Key points :
Vapour Resistance-126 MNs/g
Reinforced
Translucent
Low / Medium Risk Applications eg. infrastructure, light commercial buildings
Specification :
Length: 50m Width: 2m Thickness: 0.35mm Mass per Unit area: to be no less than 90g/m² Water Vapour Resistance - Sd Value: 25m Tensile Strength: Along the roll: 186 N/50mm Across the roll: 126 N/50mm Nail Tear Resistance: Along the roll: 195 N Across the roll: 210 N
