FRED flame retardant paint is a water-borne intumescent coating that, once dried, will stop or strongly retard the passage of fire through the substrate it is applied on. FRED flame has inhibited the formation of toxic fumes generated by fires of insulation, plastics, spray foam etc
Applied on concrete substrates, it reduces spalling and loss of structural integrity. FRED Flame is certified class A, S1, D0 FRED intumescent coating can be used on steel, wooden, mineral, and insulation substrates and is applied by airless spray, roller, or paintbrush.
Fred has a 25 minute Warrington fire test rating – Testing was completed on a load bearing timber frame wall with a load of 8kN per l/m – Tested to standard BS EN 1365-1 :2012 + corr 2013.
Key points :
[[start desc]]
FRED flame retardant paint is a water-borne intumescent coating that, once dried, will stop or strongly retard the passage of fire through the substrate it is applied on. FRED flame has inhibited the formation of toxic fumes generated by fires of insulation, plastics, spray foam etc
Applied on concrete substrates, it reduces spalling and loss of structural integrity. FRED Flame is certified class A, S1, D0 FRED intumescent coating can be used on steel, wooden, mineral, and insulation substrates and is applied by airless spray, roller, or paintbrush.
Fred has a 25 minute Warrington fire test rating – Testing was completed on a load bearing timber frame wall with a load of 8kN per l/m – Tested to standard BS EN 1365-1 :2012 + corr 2013.
[[end desc]]
[[start key]]
Low to zero ignitability
Great protection for spray foam insulation
Low heat release
High fire barrier capacities due to formation of raised charring and hence increase by 1000% when exposed to fire
Dries quickly
Can be used on most common construction materials such as concrete, steel , timber and timber sheeting, and polyurethane foam
No primer needed on most surfaces
VOC/solvent free
Specification :
[[start desc]]
FRED flame retardant paint is a water-borne intumescent coating that, once dried, will stop or strongly retard the passage of fire through the substrate it is applied on. FRED flame has inhibited the formation of toxic fumes generated by fires of insulation, plastics, spray foam etc
Applied on concrete substrates, it reduces spalling and loss of structural integrity. FRED Flame is certified class A, S1, D0 FRED intumescent coating can be used on steel, wooden, mineral, and insulation substrates and is applied by airless spray, roller, or paintbrush.
Fred has a 25 minute Warrington fire test rating – Testing was completed on a load bearing timber frame wall with a load of 8kN per l/m – Tested to standard BS EN 1365-1 :2012 + corr 2013.
[[end desc]]
[[start key]]
Low to zero ignitability
Great protection for spray foam insulation
Low heat release
High fire barrier capacities due to formation of raised charring and hence increase by 1000% when exposed to fire
Dries quickly
Can be used on most common construction materials such as concrete, steel , timber and timber sheeting, and polyurethane foam
No primer needed on most surfaces
VOC/solvent free
[[end key]]
[[start spec]]
Size: 20 kg
APPLICATION:
Mix FRED product well before use with a drill mounted paddle mixer, do not add water or solvents Surface and environment temperature during application and drying 5 – 30 degrees
Apply FRED with an airless paint spray device, paint roller or paintbrush, in one or two layers at a consumption of 0,6 to 2kg/m2 depending requested fire resistance. Advised spray tips: 531 / 421
The drying time of FRED varies between 4 to 24 hours in normal conditions.
Clean tools with water
Datasheets & Documents.
If you require a datasheet for this product please get in touch.
