[[start desc]]

CEMWOOD CW1000: The fine one.

Cavity fill and levelling fill: Fill height 10 – 60 mm

The fine mineralisation of the smaller chips makes low installation heights the prime area of use for CW1000. But as a cavity fill, it is also adept at filling shafts, ducts and wooden beam ceilings. Like all product lines, CW1000 can be installed quickly without using any water or binder.

[[end desc]]

[[start key]]

Thermally insulating and impact-sound-absorbing

Resistant to mould, fungi, rodents

No swelling or shrinkage

Low installation heights possible

Low weight

Quick processing without water

Can be walked on immediately after application

No binders

No compaction

No waste material

[[end key]]

[[start spec]]

Chip size: 1-5mm
Fire behaviour: Class Bfl-S1
Thermal conductivity: 0.007W/mK
Bulk density approx.: 320kg/m³
Uniform load distribution: 3.2kg per cm
Installation height: 10-60mm
Packaging unit: 50 litres
Material requirement per cm of fill height: 10litres per m²

[[end spec]]

[[start app]]

Applications

Levelling fill 10-60 mm under

Wet screed systems
Dry screed systems
OSB boards and fibreboards
Cavity fill, e.g. in wooden beam ceilings and installation ducts

[[end app]]