[[start desc]]

Procheck 125 is a lightweight reinforced polyethylene vapour barrier which can be utilised in a variety of commercial applications. Procheck 125 can be installed where very high moisture vapour resistance is not a necessity but a strong, durable airtight membrane is. Procheck 125 can also be used as a separating layer above Provoid 25 Gas Venting Layer to prevent grout from the concrete pour entering into the void. This will only be used when the Protech Gas Membrane is going to be placed above the slab. It is designed to be loose laid on the Provoid 25 Gas Venting Layer with a 300mm lap.

[[end desc]]

[[start key]]

Vapour Resistance-126 MNs/g

Reinforced

Translucent

Low / Medium Risk Applications eg. infrastructure, light commercial buildings

[[end key]]

[[start spec]]

Length: 50m
Width: 2m
Thickness: 0.35mm
Mass per Unit area: to be no less than 90g/m²
Water Vapour Resistance - Sd Value: 25m
Tensile Strength:
Along the roll: 186 N/50mm
Across the roll: 126 N/50mm
Nail Tear Resistance:
Along the roll: 195 N
Across the roll: 210 N

[[end spec]]

[[start app]]

[[end app]]