Cavity fill and levelling fill: Fill height 10 – 60 mm
The fine mineralisation of the smaller chips makes low installation heights the prime area of use for CW1000. But as a cavity fill, it is also adept at filling shafts, ducts and wooden beam ceilings. Like all product lines, CW1000 can be installed quickly without using any water or binder.
Key points :
Thermally insulating and impact-sound-absorbing
Resistant to mould, fungi, rodents
No swelling or shrinkage
Low installation heights possible
Low weight
Quick processing without water
Can be walked on immediately after application
No binders
No compaction
No waste material
Specification :
Chip size: 1-5mm Fire behaviour: Class Bfl-S1 Thermal conductivity: 0.007W/mK Bulk density approx.: 320kg/m³ Uniform load distribution: 3.2kg per cm Installation height: 10-60mm Packaging unit: 50 litres Material requirement per cm of fill height: 10litres per m²
Applications
Levelling fill 10-60 mm under
Wet screed systems Dry screed systems OSB boards and fibreboards Cavity fill, e.g. in wooden beam ceilings and installation ducts
Datasheets & Documents.
If you require a datasheet for this product please get in touch.
If you require a Safety datasheet (SDS) for this product please get in touch.
If you require a BBA Certificate for this product please get in touch.
