35kg Baumit Klima RK 38 Cement-free, natural white lime render
Product Code:
2.7 m²
£ Looking for a price?
Add to a quote for our best rate
Or call the team on 01786 657 911.

Baumit Klima RK 38 is a factory prepared, cement-free, natural white lime dry powder render produced in accordance with EN 998-1. Pure lime plaster for manual and machine application for internal areas. Suitable as a basecoat and finish coat to achieve a fine texture. Part of the Baumit Klima range of products for healthy living.

Key points :

Cement free

Natural white lime

For internal use only

Specification :

Bag Size: 35kg
Max Grain Size: 0.8mm
Consumption: approx 1.3kg/m²/mm
Yield: approx 2.7m²/bag/10mm


Baumit Klima RK 38 can be mixed with clean water in a tub to a lump free, creamy consistency with an electric hand mixer.
Automated continuous horizontal mixers may also be used. Only mix with clean water and other additives.
For small areas the mixed plaster can be manually applied. For larger areas the fresh plaster can be fed into a mortar pump for spray
application. Alternatively, mortar mixing pumps provide an all-in-one mixing and spraying solution.

Basecoat plaster: The plaster is applied onto the substrate to the required thickness in one or two passes (fresh-in-fresh) depending
on the degree of suction from the substrate and ruled off with a straight edge, filling in undulations to produce a flat and even plaster
layer. Minimum application is 10mm.
On hardening the surface is finely floated or finely scraped in preparation for receiving the topcoat. The drying times (1 day/mm
thickness) must be observed.
A maximum plaster thickness of 20 mm may be applied in a single application. Where necessary, greater thicknesses must be built
up in multiple coats of at least 10 mm in thickness. Upon setting the surface of each additional coat is horizontally keyed with a plasterers comb to receive the following coat. Drying times between each coat (1 day/mm thickness) must be observed.

Topcoat finish: Baumit Klima RK 38 as a topcoat plaster is applied onto the basecoat and smoothed out flat with a trowel or spatula.
Minimum application thickness is 3mm. Shortly afterwards the surface is lightly rubbed over with a fine sponge float in tight circular
motions to produce a fine, plain finish. A paint finish may be applied if required.
Baumit Klima Glätt W (lime skim finishing plaster) or Baumit internal plasters are also suitable for application onto a basecoat of Baumit Klima RK 38. Refer to the relevant Product Data Sheets.

Datasheets & Documents.
If you require a Safety datasheet (SDS) for this product please get in touch.
If you require a BBA Certificate for this product please get in touch.