[[start desc]]

[[end desc]]

[[start key]]

-Fire rated polyurethane foam filler

- EN1366-4 – Fire resistance, up to 4 hours depending on joint configuration

- Fire class DIN 4102 B1

- Acoustic rating - 58 dB

[[end key]]

[[start spec]]

Application type: Hand Held Gun
Cutting time: 65 minutes
Thermal Conductivity: 0.035W/mK

[[end spec]]

[[start app]]

Application

For use in passive fire protection systems as a large gap filler; installation of fire retardant window and door frames; sealing of expansion and connection joints, penetration seals. Thermal and acoustic insulation around doors and window frames, pipe penetrations, insulation and roofing materials and general construction.

Usage Instructions

Shake the aerosol can for at least 20 seconds.
Surface should be free from grease and dust.
Moisten surfaces with a water sprayer prior to application.
For non-conventional substrates a preliminary adhesion test is recommended.
Fill holes and cavities for 1/3, as the foam will expand.
Repeat shaking regularly during application.
If you have to work in layers repeat moistening after each layer.
Fresh foam can be removed using Soudal Gun & Foam Cleaner or acetone.
Cured foam can only be removed mechanically or with Soudal PU-Remover.

[[end app]]