Preparation
• Substrates must be clean and dry and free from any loose material prior to application.
• Test a small area for suitability with your specific materials before use.
• Do not use on contaminated surfaces, extreme environments or in any unusual circumstances.
• Do not store or use inextremes of temperature (<5C or above 30C).
• Protect surrounding surfaces, particularly glass.
• Store in airtight containers and used within 12 months.
• Do not store, or use in temperatures <5C or above 30C.

Application
• Stir well before use.
• Apply with a broad brush using short strokes and ensuring that the grit is evenly spread across the surface
• The surface to be primed must be sound and dry.
• Appropriate vapour open plasters can be applied at any point after 24 hours and MgO Plasterbond has fully cured.
• Ensure that the plaster is appropriate to the task.

Aftercare
• Clean any splashes and spills immediately.
• Allow to dry completely before further application, plaster coverings or decoration.
• Wash splashes, tools and brushes with water.
• Dispose of all surplus material in accordance with your local regulations (EWC 06 02 99).
• Cleaned tins are 100% reusable and recyclable.
• If splashed on the skin wash off immediately with water.
• Wear the appropriate Personal Protective Equipment
• Refer to the Safety Data Sheet before use.

Technical:
• pH value in liquid state: pH 11.1
• Odourless
• Dries off-white
• Non-hazardous
• No VOC’s
• Application rate varies according to use; approximate spread rate 500g/m² on a flat even surface
• Storage life (unopened tins): 36 months if kept well sealed (protect from frost, moisture and temperature extremes)